20
LAWNAIRE ZTS
MAINTENANCE
JACK STANDS
Your machine is equipped with built in jackstands.
The jack stands are useful to raise the drive wheels
off the ground for maintenance and changing chains
and belts.
– When jack stands have been positioned, run or
stop engine as appropriate for the work being
performed.
– Do not work under machine with engine running.
– Tines may drop suddenly. Support tines if you will
be working under them.
Raise machine:
1. Start the engine.
2. Pull depth stop pins.
3. Lower the tines on a hard surface
4. Increase tine pressure to raise the machine.
5. Pull jack stand pins and pin in raised position.
6. Raise tines to set machine on stands.
NOTE:
Machine may be dropped gently onto the
jack stands by reducing the tine down force until the
machine lowers. Then raise tines to the transport
position.
Lower machine
:
1. Start the engine.
2. Increase tine pressure to raise the machine.
3. Pin jack stands in operating position.
4. Raise tines to lower machine onto wheels.
5. Raise the tines to the transport position.
6. Stop the engine.
7. Reinstall depth pins.
