Chapter 5 - Installation
Identification numbers for 1,9 GHz DECT modules
At 1,9 GHz DECT modules the master shows the 2-line
message:
ARI no. (12 digits)
DECT no. (5 digits)
And the slave the 2-line message:
ARI no. (12 digits)
Roaming change level
The ARI number (ARI = Access Right Identity) must be
identical in all master and slave modules. Only modules with
identical ARI numbers are able to communicate with each
other.
The DECT number is part of the ARI number.
In a multi-master radio transmission system (two radio
masters) ARI and DECT number have to be identical in both
masters.
Read off the ARI and DECT number at one master and
write it down.
Call the identification number at the slaves and if
necessary also at the second master.
Enter the ARI number at all slaves and if necessary
also at the second master. Don
’t forget the DECT
number at the second master.
The roaming change level (2. line in slave display)
defines the bit failure rate from which the slave starts
searching for a new connection. Change the roaming
change level only after consultation with Schildknecht.
