Chapter 6
– Settings
Bluetooth
Transmitter
power setting
Visibility of
WP-3000
Bluetooth for
diagnostic
devices
In this menu in the field
HF:xxdbm
you can change and set the
default setting for the transmitting power for the Bluetooth radio
technology. The maximum value is limited to 17dbm. Together
with a omni antenna which has minimum 2,2dbi the limit by law of
20dbm EIRP is reached . Allowed values are from 0 to 17dbm
(1 to 50mW)
Press
<arrow right>
as long until the cursor is on the
position of the first digit of the transmitting power field.
Now you can set the maximum value by pressing
<arrow up>
or
<arrow down>
. Using
<arrow right>
or
<arrow left
> to set the cursor on the accurate position.
Press
<Enter>
and 2 x
<ESC>
to finish the input .
Field
Hide: x
can switch the invisibility for other Bluetooth
devices from J= invisible for other Bluetooth devices
(Default) to N= visible. For diagnostic reasons it could be
necessary to switch to
“N”. In principle it is not possible that
other Bluetooth devices can connect to WP3000 series
radios, independent of this setting.
Now you have finished Step 4 and all PROFIBUS
settings are done. The radio is now prepared for
operation.
Assembly and commissioning instructions DATAEAGLE 3000
6-20
