Chapter 6
– Settings
PROFIBUS
Diagnostic
slave address
Meaning of the
addresses
Enter addresses
Press the button
<Enter>
The display shows:
Diag.slave: 0xx
Diag.master: 0y
Diagnostic slave and master address will be displayed.
The diagnostic slave address is the DP address which is
used to address the diagnostic slave from the
PROFIBUS master.
The diagnostic master address is the address of the
controller which evaluates the diagnostic data. This can be
the PROFIBUS master or any other controller within the
PROFIBUS network.
If you want to use the diagnostic function you have to enter
all addresses now.
Enter the desired diagnostic slave address by using the
buttons
< arrow up >
and
< arrow down>
to select the
correct number. Use the buttons
< arrow right >
and
< arrow left >
to place the cursor below the correct
digit.
Press the button
< arrow right >
until the cursor is
placed below the first digit of the diagnostics master
address.
Enter the desired diagnostic master address by using
the buttons
< arrow up >
and
< arrow down>
to select
the correct number. Use the buttons
< arrow right >
and
< arrow left >
to place the cursor below the correct
digit.
Assembly and commissioning instructions DATAEAGLE 3000
6-13
