13
Liner System - for new and existing chimneys
The pumice liner system comes in a range of 15 diameters from 150mm to 1000mm with T Liners,
Liner Support Blocks, and Adaptors for ease of connection to the appliance.
The insulated flue liner
for traditional build
Lightweight materials, easy to handle
Highly insulating pumice for better draw and
minimum heat loss
600mm and 1000mm lengths mean fewer
joints and fast to install
15 flue sizes available
Good resistance to temperature variations gives
the maximum performance for your appliance
Suitable for use with inserts, stoves, open fires and
solid fuel/oil cookers.
INSET FIRE
Support block and adaptor
for connection to flue pipe
Cast in situ slab to
support chimney
Glass fronted inset fire
Downloadable drawings available from our web site
www.schiedel.co.uk
FREE STANDING STOVE
Sand/cement flaunching
around flue liner or
chimney pot
Lead tray and flashing
Structural timber
40mm from outside
of chimney or 200mm
from inside of flue liner
Support block for
stove connection
Support plate
7N blockwork
Joints sealed with lip glue
Standard flue liners with
socket uppermost
Void filled with Leca
insulation mix
140 x 140mm lintels
100 x 65mm lintels
