3. Safety informations
ATTENTION:
- accessories like transfer unit, graphite lead holder, paralleling mandrel or similar
are not allowed to be used in the milling spindle.
The spindle may be started by mistake!
- Water-cooled turbines are only indicated to use in connection with a SCHICK
suction tub to avoid defects at the elctrical equipment and corrosion.
- When using rotary instruments, do not exceed the maximum speeds laid
down by their manufacturer.
- Repairs and other technical procedures must only be carried out by suitable
qualified personnel, authorized by SCHICK.
- SCHICK do not guarantee the S3 Master milling unit should it not have
been used in accordance with the instructions
- For defects occured by using the S3 Master milling machine in another way
or by inappropriate handling the manufacturer rejects any liability.
These instructions should be readily accessible and are best kept
close to the milling machine itself !
Safety informations
!
5