25
26
24
Operation
Height adjustment
To adjust the height of the milling table
(24)
turn handweel
(25)
which is placed on the right side of the column. But first loosen
lever
(26)
working as additional clamp to fix the milling table.
Put milling table up or down according to your needs using the
handwheel and then clamp lever
(26)
to avoid unintended
movement of the table.
If needed you can put the lever
(26)
in different positions. Pull lever
axial and turn to new position; when releasing the lever
clicks into place
Height stop ring
Is the milling arm adjusted in a certain position (f.e. when milling),
but the space between model and milling spindle is to narrow to
change the tool you can mark the position of the milling table using
the height stop ring
(28).
To find again the adjusted height loosen thumb screw at heigth stop
ring
(28)
, put the heigth stop ring down till it stops at guidance
(27)
and fix it. Now the milling table can be put down and after the tool
is changed it can be returned to the original height.
7.5 Motor technics
The milling unit S3 Master is equipped with the new C3 technology.
This means extrem and stable torque in all speed ranges, silent and
vibration free running and highest balance.
With its 50.000 r.p.m. and 240 watt power the S3 milling spindle
masters even the hardest grinding and milling.
Attention:
Use only tools which are in accordance to the
working speeds !
Maintenance of motor and spindle see “ Maintenance and Care “
(point 10; page 14)
The integrated light equipment guaranties excellent illumination and
visibility of the working area.
Due to the direct connection with the milling spindle it’s not necessary
to place the light always into the right position. Light exactly where
it is needed. The light equipment is joined with a plug connection
and can easily be removed and attached. The light intensity can be
adjusted by the dimmer knob (see page 6)
Removal of light equipment see “Operation - milling spindle“
(point 7.1; page 9)
28
27
40
12