3. General Information
- Ascertain that your mains supply coincides with the data in the rating
plate
- The milling machines S3 Master
are not suitable for the following applications:
- in areas where there is a risk of explosion
- for medical applications
- Ensure that all regulatory requirements are observed during use (always waer
protective glasses).
- Under no circumstances should the milling machine be cleaned with
compressed air
- To keep the precision and the lifetime of the chuck always insert a rotary instrument
or the pin, supplied with the unit, (37) - even if the motor stands still.
- Recycling
Range of Applications / General information
Highest precision, consistent quality control und minor maintenance are the merits
of the S3 Master which has been developed under assistance of recognized experts
in milling technics.
This novel construction - the model is moved up and down by means of the height
adjustable milling table - is unique, and grants the technician ergonomic, relaxed sitting
during work.
The 3D integrated arm supports are also outstanding and support optimal the guidance
of the milling hand. This ergonomic construction allows optimal results through relaxed
working.
Conditions of environment:
- interior 5° - 40°
- up to 2.000 meter over sea level
Categorie of overvoltage: II
Grade of pollution: 2
The S3 Master milling machine is designed for use in dental laboratories
when trimming crowns and bridges, respectively acrylic and chrome cobalt dentures.
2. Range of Applications
WEEE-Reg.-Nr. DE 78620387
4