AUS
AERO
2
SPADE
Safety regulations
AFTER SALES SUPPORT
11
1300 855 831
MODEL: AERO
2
SPADE PRODUCT CODE: 59540 04/2018
Special Safety Instructions
Risks associated with ejected parts
a) Disconnect the device from the compressed air supply before replacing the
mounted tool or accessory parts, and also before carrying out repairs or set-
tings.
b) If either the workpiece, accessory parts or the device breaks, parts may be
ejected at high speed.
c) While operating, maintaining or repairing the device, or replacing accessory
parts, you must always wear impact-resistant safety goggles. The degree of pro-
tection required for each individual task must be evaluated separately in each
case.
d) Wear a safety helmet if carrying out work above your head. Also ensure that no
other people are placed at risk.
e) Ensure that the workpiece is securely attached.
f) Only switch on the device after the mounted tool has been locked correctly in
the device with the locking device.
g) To avoid injury, all parts of the locking device displaying signs of wear, or that
are broken or bent, must be replaced.
h) Place the mounted tool firmly on the surface to be worked on before switching
on the device.
Risks associated with recurring movements
a) When working with the device, you may experience an uncomfortable sensation
in your hands, arms, shoulders, neck or other body parts.
b) Make sure you are in a comfortable position to carry out work with the device,
check that the device is held securely, and avoid any awkward positions that
make it difficult, for example, to keep your balance. If carrying out work over an
extended period, you/the operator should change position occasionally. This
should help to avoid fatigue and any unpleasant sensation.
c) If the operator experiences persistent symptoms such as feeling unwell, aches,
pains or throbbing, a prickling or burning sensation, loss of hearing, or joint
stiffening, these warning signs must not be ignored.
Risks associated with accessory parts
a) Disconnect the device from the air supply before securing or replacing the
mounted tool or accessory part.
