Scheppach 5908805903, Translation Of Original Instruction Manual

Page: 29 / 112


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
GB | 29
m
WARNING
Improper maintenance or ignoring/ not rectifying a
problem during the operation may become a source
of danger. Operate your machine only if regular-
ly maintained. Only in this way you can assume that
your device is operating safe, economical and with-
out malfunctions.
Do not clean, maintain, setup or repair the ma -
chine whilst running. Moving parts may cause
serious injuries. Do not use fuel or other flammable
solvents to clean the equipment.
m
WARNING
Vapours of fuels and solvents may explode.
Refix the security and safety equipment after repara -
tion and maintenance work.
Keep the machine in safe work condition. Especially
check the fuel system for tightness.
Always remove any dirt from the cooling fins of the
engine.
Residual risks and accident prevention stand-
ards . Neglect of ergonomic principles
Negligent handling of personal protective equip -
ment
Negligent handling or ommission of the personal pro-
tective equipment may cause serious injuries.
– Wear prescribed personal protection equipment.
Human behaviour, misbehaviour
For any work be fully concentrated.
m
Residual risks - Cannot be entirely excluded.
Electrical residual risks
Electrical contact
Touching the spark plug may cause an electrical
shock.
– Never touch the spark plug while the engine is run-
ning.
Thermal residual risks
burns, chilblains
Touching of the exhaust/ case may cause burns.
– allow motor driven machines to cool.
Danger from noise
hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
– Always wear ear-muffs
• Start the engine carefully according to instructions
and with feet well away from the moving parts.
• Never leave the operating position when the engine
is running.
• Always hold the unit with both hands when oper-
ating. Keep a firm grip on the handlebars. Beware
that the machine may unexpectedly bounce up -
ward or jump forward if the machine should strike
buried obstacles such as large stones.
• Walk, never run with the machine.
• Do not overload the machine capacity. Drive at a
safe speed, adjusting the speed to the slope of the
land, the surface conditions of the road, and the
weight of the load.
• Use extreme caution when in reverse or pulling the
machine towards you.
• Exercise extreme caution when operating on or
crossing gravel drives, walks, or roads. Stay alert
for hidden hazards or traffic.
• On soft ground, drive at the first forward/reverse
gear. Do not rapidly accelerate, turn sharply or stop.
Safety informations service/ maintenance and
storage
1. Only original parts may be used for maintenance
and accessories.
2. Replace faulty silencers.
3. Before using, always visually inspect to see that
the tools are not worn or damaged. Replace worn
or damaged elements and bolts. Keep all nuts,
bolts and screws tight to be sure the equipment is
in safe working condition.
4. Regularly check for leakage or traces of abrasion
in the fuel system, such as porous pipes, loose or
missing clamps and damage to the tank or tank
cap. Before use all defects must be repaired.
5. Before checking or adjusting the machine or the
motor, the ignition plug and the ignition wire re-
spectively must be removed to prevent accidental
starting.
Storage
1. Never store the equipment with petrol in the tank
inside a building where fumes can reach an open
flame or spark.
2. Allow the engine to cool before storing in any en-
closure.
3. To reduce the fire hazard, keep the engine, silenc -
er, battery compartment and petrol storage area
free of vegetative material and excessive grease.
Long term storage/hibernation
1. In case of long term storage drain out the com-
plete fuel. Fuels are chemical compounds which
change their properties during prolonged storage.
If the fuel tank has to be drained out this should
happen outdoors.