www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
18 / 172
7
Use the correct electric tool
–
Do not use low-output electric tools for heavy work.
–
Do not use the electric tool for purposes for
which it is not intended. For example, do not
use handheld circular saws for the cutting of
branches or logs.
–
Do not use the electric tool to cut firewood.
8
Wear suitable clothing
–
Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
–
When working outdoors, anti-slip footwear is
recommended.
–
Tie long hair back in a hair net.
9
Use protective equipment
–
Wear protective goggles.
–
Wear a mask when carrying out dust-creating work.
10
Connect the dust extraction device
–
If connections for dust extraction and a collect-
ing device are present, make sure that they are
connected and used properly.
–
Operation in enclosed areas is only permitted
with a suitable extraction system.
11
Do not use the cable for purposes for which it is
not intended
–
Do not use the cable to pull the plug out of
the outlet. Protect the cable from heat, oil and
sharp edges.
12
Secure the workpiece
–
Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held
more securely than with your hand.
–
An additional support is necessary for long
workpieces (table, trestle, etc.) in order to pre-
vent the machine from tipping over.
–
Always press the workpiece firmly against
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13
Avoid abnormal posture
–
Make sure that you have secure footing and
always maintain your balance.
–
Avoid awkward hand positions in which a sud-
den slip could cause one or both hands to come
into contact with the saw blade.
14
Take care of your tools
–
Keep cutting tools sharp and clean in order to
be able to work better and more safely.
–
Follow the instructions for lubrication and for
tool replacement.
–
Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
–
Check extension cables regularly and replace
them when damaged.
–
Keep the handle dry, clean and free of oil and
grease.
15
Pull the plug out of the outlet
–
Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
–
During non-use of the electric tool or prior to
maintenance and when replacing tools such as
saw blades, bits, milling heads.
Any functional dis orders, especially those affect
-
ing the safety of the machine, should therefore be
rectified immediately.
•
The safety, work and maintenance instructions
of the manufacturer as well as the technical data
given in the calibrations and dimensions must be
adhered to.
•
Relevant accident prevention regulations and oth-
er, gene rally recognized safety-technical rules
must also be adhered to.
•
The machine may only be used, maintained, and
operated by persons familiar with it and instructed
in its operation and procedures. Arbitrary altera
-
tions to the machine release the manufacturer from
all responsibility for any resulting damages.
•
The machine may only be used with original acces
-
sories and tools made by the manufacturer.
•
Any other use exceeds authorization. The manu
-
facturer is not responsible for any damages result
-
ing from un authorized use; risk is the sole respon-
sibility of the operator.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Safety information
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury and fire.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
Safe work
1
Keep the work area orderly
–
Disorder in the work area can lead to accidents.
2
Take environmental influences into account
–
Do not expose electric tools to rain.
–
Do not use electric tools in a damp or wet en-
vironment.
–
Make sure that the work area is well-illuminated.
–
Do not use electric tools where there is a risk of
fire or explosion.
3
Protect yourself from electric shock
–
Avoid physical contact with earthed parts (e.g.
pipes, radiators, electric ranges, cooling units).
4
Keep children away
–
Do not allow other persons to touch the equip-
ment or cable, keep them away from your work
area.
5
Securely store unused electric tools
–
Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6
Do not overload your electric tool
–
They work better and more safely in the speci
-
fied output range.
GB
Summary of Contents for 5901403850
Page 165: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 165 172 ...
Page 166: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 166 172 ...
Page 167: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 167 172 ...
Page 168: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 168 172 ...
