www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
19 / 172
•
Do not cut pieces of material too small to hold by
hand outside the blade guard.
•
Avoid awkward hand positions where a sudden slip
could cause a hand to move into the blade.
•
Always use the blade guard to avoid possible injury
due to blade breakage.
•
Never leave the scroll saw work area with the pow-
er 01), or before the machine has come to a com-
plete stop.
•
Do not perform layout, assembly or set up work
on the table while the cutting tool is in operation.
•
Never turn your scroll saw on before clearing the
table of all objects: (tools, scraps of wood, etc) ex
-
cept for the workpiece and related feed or support
devices for the operation planned.
Remaining hazards
The machine has been built using modern technolo-
gy in accor dance with recognized safety rules. Some
remaining hazards, how ever, may still exist.
•
Long hair and loose clothing can be hazardous
when the work piece is rotating. Wear personal
protective gear such as a hair net and tight fitting
work clothes.
•
Saw dust and wood chips can be hazardous. Wear
per so nal protective gear such as safety goggles
and a dust mask.
•
The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
•
Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
•
Remaining hazards can be minimized by following
the instructions in „Safety Precautions“, „Proper
Use“ and in the entire operating manual.
•
Do not force the machine unnecessarily: excessive
cutt ing pressure may lead to rapid deterioration of
the blade and a decrease in performance in terms
of finish and cutting precision.
•
Avoid accidental starts: do not press the start but-
ton while inserting the plug into the socket.
•
Keep this safety information in a safe place.
6. Technical data
Extent of delivery
Scroll saw
Operating instructions
Technical data
Dimensions
L x W x H mm
630 x 295 x 370
Bench size mm
ø 255 x 415
Saw blade
length mm
134
Cutting height
max. mm
50
Working depth mm
406
Lifting
movement mm
12
Lifting speed 1/min
(electronical)
500 – 1700
Bench diagonal adjustment left
degrees
0 – 45
16
Do not leave a tool key inserted
–
Before switching on, make sure that keys and
adjusting tools are removed.
17
Avoid inadvertent starting
–
Make sure that the switch is switched off when
plugging the plug into an outlet.
18
Use extension cables for outdoors
–
Only use approved and appropriately identified
extension cables for use outdoors.
–
Only use cable reels in the unrolled state.
19
Remain attentive
–
Pay attention to what you are doing. Remain
sensible when working. Do not use the electric
tool when you are distracted.
20
Check the electric tool for potential damage
–
Protective devices and other parts must be
carefully inspected to ensure that they are fault-
free and function as intended prior to continued
use of the electric tool.
–
Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam
-
aged. All parts must be correctly mounted and
all conditions must be fulfilled to ensure fault-
free operation of the electric tool.
–
The moving protective hood may not be fixed
in the open position.
–
Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is speci-
fied in the operating manual.
–
Damaged switches must be replaced at a cus-
tomer service workshop.
–
Do not use any faulty or damaged connection
cables.
–
Do not use any electric tool on which the switch
cannot be switched on and off.
21
Attention!
–
Exercise elevated caution for double mitre cuts.
22
Attention!
–
The use of other insertion tools and other ac-
cessories can entail a risk of injury.
23
Have your electric tool repaired by a qualified
electrician
–
This electric tool conforms to the applicable
safety regulations. Repairs may only be per
-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
Warning!
This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Additional Safety Rules for Scroll Saws
•
This scroll saw is intended for use in dry condi
-
tions, and for indoor use only.
GB
Summary of Contents for 5901403850
Page 165: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 165 172 ...
Page 166: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 166 172 ...
Page 167: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 167 172 ...
Page 168: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 168 172 ...
