Scheppach 4903401901, Translation Of Original Instruction Manual

Page: 18 / 96


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
18 | GB
13. Trouble shooting
Problem Possible Cause Help
Motor doesn’t start
• ON/OFF switch damaged.
• ON/OFF cable damaged.
• ON/OFF relay damaged.
• Fuse blown.
• Motor burnt.
• Replace all damaged parts before you use
your machine again.
• Contact your local service centre. Every
attempt to carry out a repair, can be
dangerous if it is not done by skilled
personnel.
Machine gets slower
during work.
Too much pressure put on the workpiece. Reduce the pressure on the workpiece.
The wood gets burnt
during sanding.
• Sanding disc or belt covered with grease.
• Excessive pressure on workpiece.
• Replace disc or belt.
• Reduce pressure on workpiece.
Strong vibrations
• loosely mounted tool
• defective tool
• spindle knocks
• tighten tool
• change tool
• repair at a Service-Station