english 5
Manufacturer
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you much pleasure and success with your new
scheppach machine.
Note
In accordance with valid product liability laws, the manu-
facturer of this device shall not be responsible for damage
to and from this device which results from:
-
nal scheppach replacement parts.
We recommend
that you read through the entire operating instructions be-
fore putting into operation.
These operating instructions are to assist you in getting to
know your machine and utilize its proper applications.
The operating instructions contain important notes on how
you work with the machine safely, expertly, and economi-
cally, and how you can avoid hazards, save repair costs,
reduce downtime and increase the reliability and service
life of the machine.
In addition to the safety requirements contained in these
operating instructions, you must be careful to observe your
country’s applicable regulations.
The operating instructions must always be near the ma-
chine. Put them in a plastic folder to protect them from
dirt and humidity. They must be read by every operator
before beginning work and observed conscientiously. Only
persons who have been trained in the use of the machine
and have been informed of the various dangers may work
with the machine. The required minimum age must be ob-
served.
In addition to the safety requirements contained in these
operating instructions and your country’s applicable reg-
ulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.
General notes
-
age. Inform the supplier immediately of any faults.
the machine by carefully reading these instructions.
-
placement parts. You can find replacement parts at your
scheppach dealer.
and year of construction of the machine.
ust 2780
Scope of delivery
Multi-purpose saw bench
Operating instructions
Specifications
Structural
dimensions (in
transport position)
L x W x H mm
1500 x 360 x 200
Structural
dimensions (in
working position)
L x W x H mm
1500 x 500 x 760
Bench height, incl.
fastening arms mm
760
Distance support
mm
2780
Weight kg
2
Subject to technical modifications!
Legend Fig. 1
1
2
Supporting arm
3
Work piece stop
4
Transport handle
5
Spring bolt
6
Switch board
7
Clamping handle for extension rail
8
9
Adjustable work piece support
10
Work piece height adjustment
11
Cross beam (not illustrated)
Proper Use
-
ized.
ust 2780
has been
designed for the use with bench-fitted machines like
undercut mitre saws, scroll saws, circular saw benches,
etc.
ust 2780
machines with-
out fixing holes.
onto the
ust 2780
.
ust 2780
serves as a work piece support for work-
ing with undercut mitre saws, circular saw benches and
similar machines.
work piece thickness is 20 mm.
roller block) to prevent long work pieces from tilting.
purpose saw bench.
from foreign matters, such as nails or screws.
manufacturer excludes any liability for resulting dam-
ages, the risk is exclusively borne by the user.
Residual Risks
single residual risks may occur during the operation.
-