Operation Manual VISATRON® VN115/87plus EX
06/2016
Page 2
SCHALLER AUTOMATION
D-66440 Blieskastel / Saarland / Germany / Industriering 14 / P.O Box 1280
Industrielle Automationstechnik GmbH & Co. KG
Tel. +49(0)6842-508
-
0
/ Fax -260 / eMail: [email protected] / www.schaller.de
About this Manual
This operation manual was designed to answer your questions concerning the
handling, operation and maintenance of the Oil Mist Detector (OMD) VISATRON®
VN115/87plus EX. It contains no details about repairs.
The operating instructions are applicable for:
VN115/87plus EX
Should you encounter any interruption or breakdown of your VISATRON® OMD
device during operation, please contact your local representative (refer to chapter
10 ‘Service Partners’) or
Schaller Automation, Industrielle Automationstechnik
GmbH & Co. KG directly. The repair of OMD devices should be carried out by
Schaller Automation directly. You can expect safe and reliable operation of your
OMD only when the device is operated in accordance with this manual.
Please take note of the following:
Please read this manual thoroughly and acquaint yourself with the correct
installation, operation and maintenance of your VISATRON® VN115/87plus EX
device.
Installations of the VISATRON® VN115/87plus EX devices have to be in
accordance to the IACS UR M10 if applicable.
Use the VISATRON® VN115/87plus EX devices only for the purpose described in
the operation manual.
Incorrect maintenance and handling errors may cause possible device failure or
an unsafe operating environment.
The VISATRON® VN115/87plus EX devices may only be used by authorised
staff.
This operation manual must be available at the place of installation at all times.
Terms and conditions of sale
The standard terms and conditions of sale of SCHALLER AUTOMATION shall apply to
all VISATRON® and related products.
SCHALLER AUTOMATION Industrielle Automationstechnik GmbH & Co. KG warrants
that under proper use, handling and maintenance OMD VISATRON® VN115/87plus
EX is free from defects in material, design and/or workmanship. Claims of
buyers/operators, in particular compensation for damage, which does not arise at
OMD VISATRON® VN115/87plus EX itself or for natural wear and tear of
consumable supplies, e.g. filters etc., are excluded. SCHALLER AUTOMATION
Industrielle Automationstechnik GmbH & Co. KG is not responsible for defects,
which arise as a result of:
a)
natural wear and tear, improper commissioning, improper use/handling, use of
unsuitable power supply, welding processes on the engine as well as non-
observance of commissioning, installation, operating and service instructions as
given in this Operation Manual