Schaerer Ambiente 2 Page 81 User Manual Download

Page: 81 / 130

Optional Features

The battery needs changing.

See also chapter 6.1.1.

Serial EEPROM is defective.

See also chapter 6.1.1.

The flow meter is defective.

See also chapter 6.1.5.

The coffee water temperature sensor is defective.

See also chapter 6.1.2.

The tea water temperature sensor is defective.

See also chapter 6.1.4.

Tea water temperature not attained. No tea can be served.

See also chapter 6.1.4.

The steam temperature sensor is defective.

See also chapter 6.1.3.

Steam temperature not attained. No steam can be drawn off.

See also chapter 6.1.3.

Level sensor defective.

See also chapter 6.1.3.

External temperature sensor defective.

See also chapter 6.1.5.

Motor defective.

See also chapter 6.1.1.

Hoist motor control unit defective.

See also chapter 6.1.2.

Left-hand mill is blocked or defective

See also chapter 6.1.2.

Right-hand mill is blocked or defective.

See also chapter 6.1.2.

Communication with an external payment system

is interrupted.

See also chapter 6.1.1.

battery flat

**EEPROM error!

flowmeter defect

temp. sensor coffee

temp. sensor tea

Timeout heat. tea

Timeout heat. steam

level probe steam

temp. sensor steam

temp. sensor outside

motor current

grinder left blocked

grinder right blocked

piston motor timeout

error account system

BASO-2 - 02.07 - V08

Page 7-11

Summary of Contents for Ambiente 2



































































































































Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands

Schaerer Ambiente 2, User Manual

Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands