background image

User Instructions 

 

4.5.2.3. 

Load machine data from card to coffee machine 

 
 

1.   Insert SAVE DATA card into the card reader. 
2. Press

 

[ ]

 or 

[ ]

 until the following menu is displayed: 

 
 
 

SAVE DATA 

card 

Æ

 machine 

3. Press

 

[

key to save the data from the card to the coffee machine: 

 
 
 

4.  A signal indicates that the data have been transferred. The date of the previous 

backup is displayed: 

.. Load .. 

 

 
 
 

last backup 

12:00 15.10.2001 

5.  Remove SAVE DATA card from the card reader: 

 
 
 

The coffee machine returns to normal operating mode. 

 
 

select product 

12:00 15.10.2001 

4.6. 

Programming using optional chip cards 

 
 

 

The chip cards described in this chapter are available as optional features and are 
not included in the standard delivery package. You will find a list and a brief descrip-
tion of the available chip cards in chapter 2.6.2. 

 

Note: 

For all the functions described in this list, it is assumed that the coffee machine is ready 
for routine operation in normal operating mode. 
When a chip card is in the card reader, no products can be selected.  

 
 

4.6.1. PROGRAM 

card 

 
 

 

In normal operating mode, the PROGRAM card is used for statistical purposes. If a 
payment system is installed, the requisite settings for payment mode are made using 
this card. 

 
 
 
 

4.6.1.1. Menu 

 
 

-

 

Enable/disable payment mode 

-

 Switch 

prices 

-

 

MONEY card price levels 1+2 

-

 

Change token price with or without MONEY cards price levels 1+2. 

-

 

Change product prices and article numbers  (Only for external payment mode) 

-

 

Display MONEY sales 

-

 

Reset MONEY sales 

-

 

Display MASTER sales 

-

 

Reset MASTER sales 

-

 

Log on MASTER card  

-

 

Delete MASTER card table 

-

 

Enable/disable timer  

-

 

Change PIN code 

ª

Page 4-18 

BASO-2 - 02.04 - V08

 

Summary of Contents for Ambiente 2



































































































































Reviews: