Schaerer Ambiente 2 User Manual Download

Page: 52 / 130

User Instructions

Press

[

]

key.

remove card

4. Remove PROGRAM card:

insert card

MASTER/PROGRAM

5. Insert

MASTER

card.

card logged on

remove card

6. Remove

MASTER

card.

If other MASTER cards are to be logged on, repeat steps 5 and 6 several times.

insert card

MASTER/PROGRAM

Press

[ ]

to reach next menu, remove PROGRAM card

coffee machine is

ready in normal operating mode.

Up to 20 cards can be programmed

4.6.1.13. Delete MASTER table

1. Insert PROGRAM card into the card reader.
2. Press

[ ]

until the following menu is displayed:

delete MASTER

execute ` Decaf `

Press

[

]

key.

delete MASTER

delete ? ` Decaf `

Press

[

]

key.

delete MASTER

.. Done ..

If you do not wish to delete the table,

Press

[ ]

to reach next menu, re-

move PROGRAM card

coffee machine is ready in normal operating mode.

4.6.1.14. Change PIN code

1. Insert PROGRAM card into the card reader:
2.

Press

[ ]

until the following menu is displayed:

change PIN-code

execute ` Decaf `

Press

[

]

key.

change PIN-code

execute ` Decaf `

Page 4-24

BASO-2 - 02.04 - V08

Summary of Contents for Ambiente 2



































































































































Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands

Schaerer Ambiente 2, User Manual

Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands