Schaerer Ambiente 2, User Manual

Page: 101 / 130

Payment Systems
8.3.2.1. Prepare beverages
1. When the coffee machine is ready, the following message is displayed:
2. Insert the required amount into the coin slot. Warning : Only use the coins intended
for the coin slot.
insert money
12:00 15.10.2001
When a token is inserted: When coins are inserted:
3. Press product key. The product is served.
price level -1
select product
credit 1,50
select product
This message is displayed if not enough money has been inserted:
insert money
price 1,50 1 token
‹ For multiple-price coin slot systems, contact the licensed after sales service.
‹ For the coin slot to be able to accept coins the machine must be switched on
and payment mode enabled using the PROGRAM card.
(See also chapter 4.6.1.3.)
‹ If too much money is inserted, it remains as credit but cannot be reclaimed. No
coins are returned.
‹ WARNING: Credit is lost when the machine is switched off.
8.3.3. CF350 Totalisator dual-price coin slot
‹ The coin slots are programmed by the service engineer or ex-factory for two
price levels.
‹ Insert the coins or tokens. If the first price level is attained, the corresponding
product can be obtained. If a second price-level product is ordered, the follow-
ing message is displayed: “enough credit”
‹ If the second price level is attained, all products can be obtained.
‹ When a product is served, excess cash or tokens are deleted. No coins/tokens
are returned.
8.3.4. CSI (Coffee Standard Interface) external payment – Connection to coffee-bar
system
Chip cards required - None
„ - MASTER card (see chapter 8.1).
The coffee machine is connected to an external payment system and indirectly linked
to the cash register via a coffee-bar system.
The waiter is identified by the external system. When the waiter ID is authenticated,
an enable signal is sent from the payment system to the machine. When the product
is served, the article reference and the number of products are transmitted to the cash
register and booked to the respective waiter.
For all the functions described in this chapter, it is assumed that the machine is ready
for routine operation in payment mode.
BASO-2 - 02.08 - V08
Page 8-13