6
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
1.2
Protection
WARNING
The PRODUCT, with 220V option, must be linked to a protection device. This one must comply to the standards in force
in the country (NFC 15-100 in France) and must be part of the building in which the PRODUCT has been installed. The
circuit breaker must be 16 Amps and should have a response curve of type C.
WARNING
The mains plug of the MDX serves as disconnecting device. Consequently, it must be connected near the device and
easily accessible.
1.3
Power supply
WARNING
The PRODUCT, with 24VDC version, must be powered by a power supply in accordance to EN 60950-1. It must be located
close to the PRODUCT.
1.4
Grounding
DANGER
To minimize any risk of electric shock, frame and all parts of the equipment must be connected to Earth.
1.5
Installation
The PRODUCT must be fitted on a support by using the mounting brackets at the rear of the box.
1.6
Maintenance
The PRDUCT can be cleaned using a damp slightly cloth.
DANGER
For your safety, before any technical intervention or cleaning, it is imperative that the equipment is turned off and not
plugged in. It is forbidden to replace components with power cable connected.
1.7
Caution
When installing, moving, or handling this product or peripherals connected to it, refer to the instructions below to
connect and disconnect the various cords.
Connection:
Disconnection:
1.
Turn off the units.
2.
Start by connecting all cords to the units.
3.
Connect the interface cables to the connectors.
4.
Connect the power cords into outlet.
5.
Turn on the units.
1.
Turn off the units.
2.
Disconnect the power cords from the outlets.
3.
Disconnect the interface cables from the
connectors.
4.
Disconnect all cabled from the units.
