7
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
2
ENOD4 PRODUCT RANGE
2.1
General presentation
eNod4
is a high speed digital process transmitter with programmable functions and powerful signal processing
capabilities.
eNod4
offers operating modes for advanced process control both static and dynamic.
Quick and accurate:
•
Analog to digital conversion rate up to 1920 meas/s with maximum scaled resolution of ±500 000 points.
•
Digital filtering and measurement scaling.
•
Measurement transmission up to 1 000 meas/s.
Easy to integrate into automated system:
•
USB
,
RS485
and
CAN
communication interfaces supporting
ModBus RTU
,
CANopen®
and
PROFIBUS-DPV1
(depending on version) communication protocols.
•
Digital Inputs/Outputs for process control.
•
Setting of node number by rotary switches and communication baud rate by dip switches.
•
Integrated selectable network termination resistors.
•
Wiring by plug-in terminal blocs.
2.2
Versions
2.2.1
Communication protocol versions
•
Strain gauges load-cell conditioner with
CANopen®
and
ModBus RTU
communication.
•
Strain gauges load-cell conditioner with
Profibus DP-V1
and
ModBus RTU
communication.
•
Strain gauges load-cell conditioner with
Modbus TCP
and
ModBus RTU
communication.
•
Strain gauges load-cell conditioner with
EtherNet/IP
and
ModBus RTU
communication.
•
Strain gauges load-cell conditioner with
Profinet IO
and
ModBus RTU
communication.
•
Strain gauges load-cell conditioner with
EtherCAT
and
ModBus RTU
communication.
EDS, GSD, ESI and GSDML
configuration files for above protocols
can be downloaded from our web site:
2.2.2
IO+ version
In conjunction with all communication protocol versions,
eNod4
can
supports an opto-insulated board fitted with:
•
2 additional digital inputs and 1 speed sensor dedicated input.
•
0-5V or 0-10V analog output voltage.
•
4-20mA, 0-24mA, 0-20mA or 4-20mA with alarm at 3.6mA analog output current.
2.3
eNodView Software
So as to configure
eNod4
, SCAIME provides eNodView software tool.
eNodView
is the software dedicated to eNod
devices and digital load cell configuration from a PC. This simple graphical interface allows accessing the whole
functionalities of
eNod4
for a complete setting according to the application.
eNodView
features and functions:
•
eNod4 control from a PC
•
Calibration system
•
Modification/record of all parameters
•
Measure acquisition with graphical display
•
Numerical filters simulation
•
Frequential analysis FFT
•
Process control
•
Network parameter
eNodView
software is available in English and French version and can be downloaded from our web site:
or ordered to our sales department on a CD-ROM support.
