8
Digital Operator
Use the digital operator to enter Run and Stop commands, edit parameters, and display data including
fault and alarm information.
Figure 1.3: Keys and displays on the Digital Operator
No.
Display
Name
Function
1
Function Key (F1, F2)
Functions assigned to F1 and F2 vary depending on
the currently displayed menu. The name of each
function appears in the lower half of the display
window.
2
ESC Key
• Returns to the previous display.
• Moves the cursor one space to the left.
3
RESET Key
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
4
RUN Key
Run the motor when the drive is in the LOCAL
mode.
5
Up Arrow key
Scrolls up to display the next item, select parameter
numbers, and increment setting values.
6
Down Arrow Key
Scrolls down to display the previous item, select
parameter numbers, and decrements setting values.
7
STOP Key
Stops drive operation.
8
ENTER Key
• Enters parameter values and settings.
• Selects a menu item to move between displays.
9
LO/RE Selection Key
Switches drive control between the operator
(LOCAL) and the control circuit terminals
(REMOTE) for the Run command and speed
reference. The LED is on when the drive is in the
LOCAL mode (operation from keypad). [Not
available in SBT-L450]
10
LO/RE Light
Lit while the operator is selected to run the drive
(LOCAL mode). This feature is not available in this
version.
11
FWD Light
Lit while the drive runs in the forward direction.
12
REV Light
Lit while the drive runs in the reverse direction.
13
MOD Light
Lit when the energy injected by the drive is
negative.
14
RDY Light
Lit when the drive is ready to operate.
15
BB Light
Lit when the drive is in the base block status.
16
ALM Light
Blinks when an alarm occurs.
LO/RE
FWD
REV
MOD
RDY
BB
ALM