manualshive.com logo in svg

SBC PCD7.L630, Instruction Manual

The SBC PCD7.L630 is a high-performance control panel designed for use in various industrial applications. With its user-friendly interface and advanced features, it ensures efficient operation. A comprehensive Instruction Manual is available for free download from our website, providing detailed guidance on operating and maximizing the potential of this exceptional product.

Share
Download
background image

Saia-Burgess Controls AG

Manual for PCD7.L6xx room operator units

 │ 

Document 26

-859 

 E

NG07 │ 2015-06-04

Content

0-1

 

0

0 Content

0 Content

0.1 

Document History  ............................................................................................... 0-2

0.2 

About this manual  .............................................................................................. 0-2

0.3 

Brands and trademarks   ..................................................................................... 0-2

1 

Assembly instructions

2 

Analogue room control units

2.1 

Techn. specifications of analogue room control units PCD7.L630 - .L632 

 ......... 2-2

2.1.1  Technical data for PCD7.L630 

 ........................................................................ 2-4

2.1.2  Technical data for PCD7.L631  

 ....................................................................... 2-5

2.1.3  Technical data for PCD7.L632 

 ........................................................................

 2-6

3 

Digital room control units

3.1 

Technical specifications of digital room control units PCD7.L640 - .L644 

 .......... 3-2

3.1.1  Technical data for PCD7.L640 

 ........................................................................ 3-4

3.1.2  Technical data for PCD7.L641 

 ........................................................................ 3-5

3.1.3  Technical data for PCD7.L642 

 ........................................................................

 3-6

3.1.4  Technical data for PCD7.L643 

 ........................................................................ 3-8

3.1.5  Technical data for PCD7.L644 

 ........................................................................ 3-10

 

Operation / Menu structur  ............................................................................... 3-12

3.1.6  Technical data for PCD7.L660 / PCD7.L661 (versions SV1.5 and SV6.1) 

 ..... 3-13

3.1.7  Technical data for PCD7.L662 / PCD7.L663 (version SV2.8K) 

 ...................... 3-18

3.2 

Technical data for PCD7.L650 

 ........................................................................... 3-23

3.2.1  Light: 

2 light groups with sensor commands 'on' and 'off'

 

Shade: 

2 groups up/down via electronic sensor 

 ............................. 3-25

3.2.2  Light:  

1 light group sensor on, automatic off after time delay

 

Shade: 

2 groups shades up/down 

 ..................................................

 3-26

3.2.3  Light:  

1 light group sensor on, off via network command

 

Shade: 

2 groups shades up/down 

 ..................................................

 3-27

3.2.4  Light:  

2 groups via switch

 

Shade: 

2 groups via changeover contacts up/down 

 ....................... 3-28

4 

Cables for room controllers and room control units

A Appendix

A.1 Icons 

 ................................................................................................................... A-1

A.2  Order codes  ....................................................................................................... A-2

A.3  Contact  

 .............................................................................................................. A-4

Summary of Contents for PCD7.L630















































Reviews:

No comments

Related manuals for PCD7.L630

S&C 5800 Series Operating Instructions Manual preview
5800 Series
Brand: S&C Pages: 40
S&C 5800 Series Troubleshooting Manual preview
5800 Series
Brand: S&C Pages: 34
EasyIO FG Series User Manual preview
FG Series
Brand: EasyIO Pages: 12
RMG GSM 3ST User Manual preview
GSM 3ST
Brand: RMG Pages: 6
Acclaim Lighting Canvas User Manual preview
Canvas
Brand: Acclaim Lighting Pages: 32
Baader Planetarium Steeldrive II Manual preview
Steeldrive II
Brand: Baader Planetarium Pages: 7
Beaphar RabbitComfort Product Information preview
RabbitComfort
Brand: Beaphar Pages: 2
Balmar Max Charge MC-624 Installation And Operator'S Manual preview
Max Charge MC-624
Brand: Balmar Pages: 8
Balmar MAX CHARGE MC-614 Installation And Operation Manual preview
MAX CHARGE MC-614
Brand: Balmar Pages: 20
Danfoss vlt soft starter mcd 500 Operating Instruction preview
vlt soft starter mcd 500
Brand: Danfoss Pages: 95
Danfoss EKE 347 Installation Manual preview
EKE 347
Brand: Danfoss Pages: 12
Danfoss VLT 5000 Instruction Manual preview
VLT 5000
Brand: Danfoss Pages: 33
Danfoss VLT 6000 Installation Manual preview
VLT 6000
Brand: Danfoss Pages: 59
Danfoss EKC 361 User Manual preview
EKC 361
Brand: Danfoss Pages: 16
Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual preview
VLT AQUA Drive FC 200
Brand: Danfoss Pages: 91
Danfoss EvoFlat WSS Installation Manual preview
EvoFlat WSS
Brand: Danfoss Pages: 2
Danfoss FC 300 Operating Instructions Manual preview
FC 300
Brand: Danfoss Pages: 100
Danfoss FC 300 Operating Instruction preview
FC 300
Brand: Danfoss Pages: 82

Brands by name

Popular brands

Load more brands