ASSEMBLY INSTRUCTIONS
4 COLUMNS DUPLEX P-150
23
4.2
LED LINE PROGRAMMING (factory set up)
4.3
TOTAL MEMORY DELETION
1
Press and hold PROG on the electronic unit for over 2
seconds until the S1 LED flashes, then release.
(
S1
output set up)
PROG.
S1
S2
>2s
2
Press PROG. again to select
S2
.
(if LEDs flash 3 times)
PROG.
S1
S2
x3
3
Select the profile desired for the motor.
4
Press
Λ
+V
simultaneously.
(Required output setup)
my
<
<
V
+ V
5
Press
PROG.
briefly at the back of the remote.
(if LEDs flash 3 times).
x3
Press PROG. on the electronic unit for over 7 seconds until all
LEDs in the system light up (total memory deletion)
PROG.
S1
S2
CONFIGURED
