![Saxun Bioclimatic Pergola P-150 Assembly Instructions Manual Download Page 18](http://html1.mh-extra.com/html/saxun/bioclimatic-pergola-p-150/bioclimatic-pergola-p-150_assembly-instructions-manual_1204931018.webp)
BIOCLIMATIC PERGOLA
VERY IMPORTANT:
The central beam transmission plates must be installed simultaneously with the mounting of
the slats in duplex pergola panels (install 2 or 3 slats, then install the plates).
ATTENTION:
When installing the
plate in the slats, do not tighten
too much the screw nuts, so they
are set without tightening. Thus
the plate can perform manually
the opening and closing move-
ments with no friction whatso-
ever.
INSTALLING THE TRANSMISSION PLATE
To mount the motor there is a tandem axle holding the two central transmission plates. These have two pre-drilled holes
and must be installed towards the closing area nearest to the motor area, 5th or 6 th slat.
If you prefer, the LEFT and RIGHT beam plates can be mounted after all the slats have been inserted.
Join the plates to the end caps with their
corresponding ULS (ISO 7380) A2 M6x16
screws, 6,3 mm rimmed plastic caps and
M6 DIN 985 nut.
ULS (ISO 7380) A2 M6x16
Code 051103
ULS (ISO 7380) A2 M6x16
Code 051103
NUT M6 A2 DIN 985
Code 051048
NUT M6 A2 DIN 985
Code 051048
CASQUILLO CON REBORDE 6,3
Code 051033
RIMMED CAP 6,3
Code 051033
TRANSMISSION PLAT
TRANSMISSION PLAT