BIOCLIMATIC PERGOLA
1.4
ASSEMBLING THE CENTRAL BEAM
When mounting the central beam, you should pass the
LED connectors and motor connection cable through to
the closing beam using a purposely pre-drilled hole. Once
inserted into the closing beam, take them towards the re-
quired column to complete the connection.
Mount the CENTRAL beam between the opening and clos-
ing beams.
Match the holes in the top plates of the central beam
with the top rivet nuts on the opening and closing beams.
Simultaneously match the holes in the S duplex bottom
plate supporting the opening and closing beam.
Tighten all the plates using the ULS (DIN 7380) A2 M6x16
screws provided.
CENTRAL BEAM
SCREW ULS (ISO 7380)
A2 M6x16
Code 051103
SCREW ULS (ISO 7380)
A2 M6x16
Code 051103
TOP PLATE DUPLEX
Code 050251
BOTTOM PLATE DUPLEX
Code 050270
