BIOCLIMATIC PERGOLA
When proceeding to mount the 5th or 6th slat, you will reach the area with the pre-drilled holes in the transmission plates,
intended to install the COMPLETE TANDEM AXLE SET with code: 050307.
The transmission plates have some pre-drilled holes to mount the driving tandem axle, which should be placed near the
CLOSING area.
There could be variations in the mounts for
the motor and tandem axles provided, but
all the pre-drilled holes made in the pergo-
la, as well as the screws and pins provided,
will be adequate for each case.
1.10
MOTOR INSTALLATION
You should already have the motor on the central beam, unless otherwise specified in the manufacturing order.
Steps to join the motor to the transmission plate tandem axle.
1
Move the tandem axle, together with the transmission plates and mounted slats, until the tandem axle carrying
mount matches the motor rod.
2
Fasten it by inserting the pin and cotter pins or screw provided.
1
2
2
TANDEM FULL SET
Code 050307
