All rights reserved! Non authorized copy and/or not agreed usage of document prohibited.
Page 15
4.4.
Environmental and transport conditions
Environmental and transport conditions for the BG and the charging dock are given in the table
below:
All remaining HW components of SAVVY (SAE, PDA) should obey the conditions prescribed by
manufacturers.
5.
Device setup
5.1.
Installation of the mobile application
Install the mobile application MobECG on your PDA from Google Play Store and upon
installation confirm all requested permissions. If the user is not experienced with mobile
applications, should seek assistance from an operator. After successful installation, the MobECG
application icon
should appear on the PDA screen. Check regulary for updated version on
Google play Store.
Note: in case any function is not understood please contact supplier or producer.
5.2.
Positioning of the electrodes
Before initiating the measurements, fix the Savvy sensor to the skin using standard self-
adhesive electrodes. First, while the electrodes still have a protective foil, attach them on the
Savvy sensor. Then, remove the protective foil from the electrodes and fix the Savvy sensor on
cleansed skin. The Savvy sensor should be placed on an appropriate position on the chest where
it does not cause discomfort for the user and where the ECG waves are clearly visible. Figure 8
shows several recommended positions of the electrodes, which should provide quality ECG
measurements. Additionally, the operator can suggest placing the electrodes on a specific
position on the body according to a specific user treatment.
Environmental conditions
NORMAL OPERATION
TRANSPORTATION AND
STORAGE
Environmental temperature:
-10
0
C to +40
0
C
-20
0
C to +70
0
C
Relative humidity:
10 % to 95 % (limited
condensation)
10 % to 95 % (limited
condensation)
Atmospheric pressure:
700 – 1060 hPa (mB)
700 – 1060 hPa (mB)