Savin 4800WD, Operating Manual

Page: 31 / 156

Guide to Components
21
1
5.
Rear output
Stacks copies delivered to the rear out-
put.
6.
Copy output (rear) auxiliary
guide
When ejecting A0(E) size paper to the
rear output, this guide prevents the
leading edge of the paper to be caught
in the copy output tray.
❖ ❖ ❖ ❖
Upper Tray (Tray 1, Tray 2)
1.
Anti-humidity heater switch
When humidity is high, paper in the
paper tray may absorb moisture,
which can affect copy quality. The
anti-humidity heater prevents this.
Turn this switch on when humidity is
high. See p.32 “Anti-humidity Heater
Switch” .
2.
Paper holder
The two paper holders grip the paper
roll and are mounted on the paper roll
tray's roll holder.
3.
Paper feed knob
Use when loading paper rolls or clear-
ing paper jams. See p.105 “Loading
Paper” and p.110 “
x
Clearing Mis-
feeds”.
4.
Cutter knob
Use to manually cut paper if there are
paper jams in the cutter area of the
machine. Always return the cutter
knob to the left or right end.
5.
Auto feed button
Use this to clear misfeeds in the paper
feed area. Keep this button pressed to
feed the roll paper continuously.
When approximately 100 mm, 3.9" of
paper length is fed, release the button
so that paper will be cut automatical-
ly.
6.
Roll holder
Adjust this to the size of the paper roll
you are using. See p.115 “Changing
the Paper Size”.
ZEDH340J
1
2
3
4
2
5
6
DolphinC2_EN_zentai_F_pre_FM.book Page 21 Friday, February 25, 2005 7:09 PM