Savin 4800WD, Operating Manual

Page: 70 / 156

User Tools (System Settings)
60
4
❖ ❖ ❖ ❖
Fine Ratio Adjustment: Copier
Depending on paper type, environment, and humidity, copy paper can ex-
pand or shrink slightly. This means that the size of the copy and the original
do not match. If this happens, specify the vertical and horizontal correction
ratio. You can specify this setting for each paper type (plain, translucent, film
and recycled paper).
Note
❒
Default: 0.0%
❒
From –1.0% to 1.0% (in 0.1% increments)
❒
To set the Fine Ratio setting, measure the length of the original and the
copy image to calculate the ratio.
ABB009S
ZEDG010E
Calculating the Correction Value (%)
To copy at the same size as the original
Example)
Copy Original
Horiz. Horiz.
... For the example above:
correction value(%)
Set the correction value (horizontal) to 0.8%.
DolphinC2_EN_zentai_F_pre_FM.book Page 60 Friday, February 25, 2005 7:09 PM