Savin 4800WD, Operating Manual

Page: 68 / 156

User Tools (System Settings)
58
4
❖ ❖ ❖ ❖
Feed Start Method
You can specify whether feeding starts automatically or after pressing the
{{{{
Start
}}}}
key.
Note
❒
Default: Auto
❖ ❖ ❖ ❖
Original Output
You can specify the original output tray to use when the power is turned on
or the
{{{{
Clear Modes
}}}}
key is pressed.
Note
❒
Default: Top
❖
❖ ❖
❖
Paper Thickness: Paper Tray
You can specify the thickness of paper loaded in the paper trays. If the image
on copies is scratched, or the paper wrinkles when using translucent paper,
you can change the setting to get better copies.
• Default:
2 (Plain Paper, Translucent paper, and Recycled Paper), 3 (Film )
The paper thickness can be set from 1 (Thicker) to 5 (Thinner).
Note
❒
Refer to the chart below when selecting the mode for the paper thickness.
*1
Out of guarantee
Thickness 1 2 3 4 5
Paper type
Plain paper
110 g/m
2
(29.3 lb)
90 g/m
2
(23.9 lb)
(Standard
mode)
70 g/m
2
(18.6 lb)
60 g/m
2
(15.9 lb)
50 g/m
2
or
less
(13.3 lb)
Translucent
paper
70 – 90 g/m
2
(18.6 – 23.9 lb)
70 – 80 g/m
2
(18.6 – 21.3 lb)
(Standard
mode)
70 – 80 g/m
2
(18.6 – 21.3 lb)
50 – 70 g/m
2
(13.3 – 18.6 lb)
Hemmed
paper
*1
* If the paper wrinkles when using mode 2,
try using mode 1.
Film 0.07 mm –
0.095 mm
(2.8 Mil – 3.7
Mil) 0.07 mm –
0.095 mm
(2.8 Mil – 3.7
Mil) 0.07 mm –
0.095 mm
(2.8 Mil – 3.7
Mil) (Stan-
dard mode) 0.07 mm –
0.095 mm
(2.8 Mil – 3.7
Mil) —
Recycled
paper
110 g/m
2
(29.3 lb)
90 g/m
2
(23.9 lb)
(Standard
mode)
70 g/m
2
(18.6 lb)
60 g/m
2
(15.9 lb)
50 g/m
2
or
less
(13.3 lb)
DolphinC2_EN_zentai_F_pre_FM.book Page 58 Friday, February 25, 2005 7:09 PM