MW-1000™ User Guide
14
6
Configuring MW-1000 software settings
Configuration section provides you with most-important configurations and advanced
configurations settings for MW-1000
™
device.
Note:
All the configuration changes will be applicable only when you reboot
MW-1000™
, unless
otherwise specified.
6.1 Most important configurations
Most important configuration parameters are listed below
Configuration Item
Value
Description
Wireless Configuration.
File-path: /etc/config/hostapd-minimal.conf
ssid
SavariHMI
Sets the name (SSID = service set identifier) of the
network
wpa_passphrase
SavariSafetyAp
plications
These establish what the pre-shared key will be for
wpa authentication.
wpa_key_mgmt
WPA-PSK
This controls what key management algorithms a
client can authenticate with.
DSRC configurations.
File-path: /etc/config/v2vi_obe.conf
TxDataRate_Mbps
6 – 54
(default: 12)
Configuration parameter is twice the actual 10 MHz
channel rate (i.e., 12=6Mbps)
Configuration parameter is the actual 20 MHz
channel rate (i.e., 12=12Mbps)
Valid values: 6, 9, 12, 18, 24, 36, 48, 54
TxPwrLevel_dBm
0 – 33
(Default: 23)
Valid values: 0 to 33 in increments of 1 dBm.
DSRC applications configurations
File-path: /etc/config/v2vi_obe.conf
BSMSecurityEnable
0,1
(Default: 1)
Enables / Disables the security functionality.
0: Disable
1: Enable
BSMPartITxInterval_ms
50, 1000
(Default: 100)
BSM Transmit interval
Valid Values:
50, 100, 200, 300, …,1000 ms
BSMContinuousChanNum
172, 184
(Default: 172)
Channel number to use when ‘Channel Mode’ is set
to ‘0’.
Even channel number applicable to 10 MHz
channels.
Odd channel numbers applicable to 20 MHz
channels.
The channel number and channel modes should be
