sauter OFL1.0, Manual

Page: 51 / 64

51
4)Subsequently insert the router motor into the adapter (19). Make sure the
router mount is pointing towards the insert plate (8), the clamping collar of the
motor has been inserted by a minimum of 20 mm and that there is thus a positive
connection. Now tighten the adapter to the recommended torque of 13 Nm and regu-
larly check it is positioned correctly and securely.
7.2 Installing the router motor on OFL2.0-AD43 or ADAP43-OFL adapter
1)Turn the height adjustment (1) of the router lift counter-clockwise until the ins-
tallation plate (6) is at maximum distance from the insert plate. This will improve
access for installation.
Fig. 11
View of attachment screws
(OFL2.0 as example)
2)Place the router lift on a secure surface
with the operating side facing downwards
so that the installation plate
(6) points
upwards. Do not undo the installation plate
(6) screws.
3)Now hold the ADAP43-OFL adapter to the
installation plate if it has not already been
installed (see delivery scope of OFL2.0-
AD43). Subsequently select the intended
installation bores
(18) C and E and
screw on the adapter (19). For this
purpose, also refer to the bore data in the
“Permissible routers and router motors”
section.
Fig. 12 Installing the router motor
(OFL2.0 as example)