Description of parameters
2 - 39
7000928003 R4
Sauter Components
rXs.
Range (setpoint range) Xs
Access:
Service level
Specifies the maximum input value for controllers 1+2 separately. The inputted value must be less than or equal to rXs
.
rY3
Range Y3 output
Access:
Service level
Specifies the end of the range for the measurement amplifier, with 10 Volt output: e.g. 40 °C.
rY3
Range Y3 output
Access:
Service level
Specifies the start of the range for the measurement amplifier, with 0 Volt output: e.g. –20 °C.
If you enter rY3
< rY3
, for example, a P-controller can be configured with mode of action B.
WS shift (W)
Access:
Manual
Amount of shift. The command module has a shift effect on the active setpoint. In conjunction with the parameters FP and F1
(with preceding mathematical signs), a shift is possible in all 4 quadrants. See also .FP and .F1.
SL
Slope of heating curve
Access:
Manual, automatic
Definition: SL= flow temperature/ outdoor temperature.
SME
Write into memory
Access:
Service level
Writes (copies) the controller's parameters in the external parameter memory.
Summary of Contents for RDT 300 F001
