Sauter Components RDT 300 F001, User Manual

Page: 10 / 64

2 - 6 Service
7000928003 R4
Sauter Components
Choice of model; memory; equipment data; re-start
LME
SME
- Copies the parameters
from the controller into
the memory
Memory (option)
- Copies parameters
from memory into
controller
!
VER
RDT
!
Cl
Cl
Mod
F
Plug memory
in
Reset to
factory setting Enter
Code
!
Cl
OK
Yes
No
Copies the parameters
from the controller
into Memory
Restart
Ini
Reinitialisation
Copies parameters
from memory
into Controller
Software version
Device type
If not present,
enter model
300
_._
B09373
3)
1)
Enter code.
3)
An 'F' in the display stands for 'Fault'. This also appears when there is an internal memory failure after a reset, e.g. due to
a power failure. The controller then uses the default values and control model 0.