The Y-Rails
The two Y-carriages are on either side of the beam. You must lubricate the Y-rails
that they ride on. The Y-rails are accessed through the slots on either side of the
beam. Refer to Figure 2-28 for the specific points of lubrication.
1. Insert the tube of the oil bottle into the slot and place 1 to 2 drops on
each side of the Y-carriage, as shown in Figure 2-30.
2. Move the beam back and forth a few times to distribute the oil. Lubricate
this area once every 160 machine operating hours.
Figure 2-30
The Pantograph
2 - 27
110207-01, Rev. B
2. Lubrication
