EMC 10, EMC 10T, EMC 10/4, EMC 10/4T:
1. Using the keypad, press the [ALT][
⇐
] keys to move the needle case to
needle #1 (full left position).
2. Remove the cover panels on either side of the sewing head.
3. Locate the puddle slot located on the top, right side of the linear bearing
guide. Place three to five drops of sewing machine oil in the slot.
4. Using the keypad, press the [ALT][
⇒
] keys to move the needle case to
needle #10 (full right position)
5. Locate the puddle slot located on the top, left side of the linear bearing
guide. Place three to five drops of sewing machine oil in the slot.
6. Replace the cover panels.
Puddle slot location
Figure 2-10
2 - 12
Lubricating The Sewing Head
Basic Maintenance
Melco Embroidery Systems
