Power Supply Fan
EMC 1, EMC 6, 6M, 6ML, 6MLT, EMC 10, EMC 10T
CH 1, ADV 18:
Use a small vacuum and/or a lint brush to remove any accumulated dust from the
power supply fan. Figure 1-8 shows the location of the power supply fan.
EMC 6/4, 6/4M, 6/4MT, EMC 10/4, EMC 10/4T:
The power supply fan features a foam filter element that may be removed as shown
in the figure below. Clean the filter by rinsing with ordinary tap water and allow it to
dry completely before reinstalling. Use a small vacuum and/or a lint brush to remove
any accumulated dust from the fan assembly and surrounding area.
Power Supply Fan
Figure 1-8
Unsnap this cover
to remove the
filter element
located behind it.
Figure 1-9
1-10
Exterior Surfaces
Basic Maintenance
Melco Embroidery Systems
