Barcode Printer MB 400i / MB 410i
Setup and initial operation
2006-08-21
21
Fig. 21
:
Sliding the peeling unit forward
16.
Slide the peeling unit forward until it stops.
The printer is now ready to print labels in peeling printing mode.
NOTE!
When using peeling printing mode, make sure to
follow the procedure above to switch the peeling
unit from peeling printing mode to continuous
printing mode before changing the paper.
5.3 Setting up communication
5.3.1 General information
NOTE!
For more information on how to set up
communication, please refer to the included CD-
ROM.
Fig. 22
:
DIP switch
The interface connectors are equipped with a quadruple DIP switch
that can be used to configure the printer output.
1.
Open the port covers to access the DIP switch.
