Barcode Printer MB 400i / MB 410i
Setup and initial operation
22
2006-08-21
5.3.2 Connecting the USB cable
Fig. 23: Configuring the USB connector
1.
Adjust the DIP switch settings as follows:
Switch
1
Æ
ON
Switch 2
Æ
ON
Switch
3
Æ
OFF
Switch
4
Æ
OFF
Fig. 24: Connecting the USB Cable
2.
Insert the USB cable (2) into the connector.
NOTE!
Match the arrow on the USB cable connector with
the arrow beside the printer connector.
3.
Close the printer cover (1).
4.
Connect the other end of the USB cable to the connector on
the PC or the handheld terminal.
5.3.3 Connecting the RS-232C cable
Fig. 25: Configuring the RS-232C cable
1.
Adjust the DIP switch settings as follows:
Switch
1
Æ
OFF
Switch
2
Æ
OFF
Switch
3
Æ
OFF
Switch
4
Æ
OFF
Fig. 26: Connecting the RS-232C cable
2.
Remove the RS-232C connector cover.
3.
Insert the RS-232C cable into the connector.
NOTE!
Match the arrow on the RS-232C cable connector
with the arrow beside the printer connector.
4. Connect the other end of the RS-232C cable to the connector
on the PC or the handheld terminal.
