Barcode Printer MB 400i / MB 410i
Operation
24
2006-08-21
6 Operation
NOTE!
For more detailed information on how to operate
the printer, please refer to the included CD-ROM.
6.1 Switching the printer on
Fig. 30
:
Switching the printer on
1.
Press and hold the POWER key until the STATUS LED (1)
lights green.
2.
Release the POWER key.
3.
Press the POWER key again until the STATUS LED (1) turns
off.
4.
Release the POWER key again.
6.2 Test printing
Fig. 31: Test printing
1.
Press the FEED key (1) and the POWER key (2) at the same
time.
The printer is now set to testing mode.
2.
Press the FEED key (1) again to start test printing.
3.
Make sure the test printout contains only complete characters
and is of good enough quality.
NOTE!
In testing mode, the remaining battery power is
displayed by three vertical bars.
If all three bars are hatched, the battery pack is
fully charged. However, if only one bar is hatched,
recharge the battery pack.
