Barcode Printer MB 400i / MB 410i
Setup and initial operation
16
2006-08-21
5.2 Inserting labels
5.2.1 Setting the printing mode
Fig. 5
:
Continuous printing mode
Fig. 6
:
Peeling printing mode
Fig. 7: Changing the printing mode
Before inserting any labels, make sure to select the desired
printing mode.
Select
Continuous printing mode
if you want to print labels
continuously. The labels will then stick to the roll after they have
printed.
If you select
Peeling printing mode
, you will have to peel off the
labels first after they have printed
.
NOTE!
For further information on how to configure printing
modes, please refer to the included CD-ROM.
Changing the printing mod
e
1.
Check if the printer cover has been closed.
2.
Push the printing mode switch lever upwards and keep it
depressed.
Switching to continuous printing mode
3.
Pull the peeling unit towards you following the direction of the
arrow.
Switching to peeling printing
4.
Move the peeling unit backwards in the direction of the arrow.
CAUTION!
Risk of damage to property!
Do not move the peeling unit unless the printer
cover has been closed, as the peeling unit may
otherwise become damaged.
