Barcode Printer MB 400i / MB 410i
Setup and initial operation
20
2006-08-21
Fig. 18: Inserting the paper roll
6.
Insert the paper roll into the printer.
NOTE!
Make sure the paper roll is well aligned to prevent
paper jams.
Fig. 19
:
Checking roller rotation
7.
Confirm that the label roll rotates easily by hand.
8.
If rotation is labored, remove the label roll again.
9.
Re-adjust the label guide as specified above.
10.
Once again, check if the roll rotates easily.
Fig. 20
:
Closing the cover
11.
Pull out the label tip approx. 10 mm.
12.
Slide the cover opening/closing lever in the direction of the
arrow while closing the printer cover carefully.
13.
When using non-separated labels, press the FEED key to
feed one sheet,
14.
and pull upward to cut along the perforated line.
15.
If the labels clog at the dispenser, restart the label setting
process from the beginning.
