Section 3: Operation and Configuration
CW408 Operator Manual
Page 3-31
3.14 TEST PRINT MODE (Cont’d)
3.14.1 Types of Test Prints
The following test print types are available.
1.
Factory test print
2.
Configuration test print (User test print)
3.
Service test print
4.
Barcode test print
5.
Head check test print
6.
Font test print
3.14.2 Factory Test Print
The Factory test print will print out the printer’s setting.
Printed contents are subject to change without notice and the value depends on individual settings.
The printer setting will be printed on 3 pages when executing factory test print via the test print mode.
1)
First piece
--
Printed Item Name
Item Name
Description
Model Name
Model name
CW408
Firm Version
Firmware version
58.xx.xx.xx
Firm Date
Firmware creation date
YY.MM.DD
(The last two digits of the year, month, and date)
Check Sum
CONT PCB's checksum
(B)xxxx (P)xxxx
(K)xxxx (A)xxxx
PCB Version
CONT PCB's version
x
PCB S/N
CONT PCB's serial number
xxxxxxxx
Life Counter
Life counter
Printing the total usage.
xxxxxxxxx.x(m)
Head Counter 1
Head Counter 2
Head Counter 3
Head counter 1, 2, 3
Printing the total usage of print head.
xxxxxxxxx.x(m)
Cutter Counter
Cutter counter
Printing the cutter usage.
xxxxxx(cuts)
Head-Check [All]
Head check result
Performing head check and printing out its result.
Head check OK: OK
Head check NG: NG
(NG will be highlighted)
Pitch [-3.75~+3.75]
Print position adjustment
value
±3.75(mm)
Offset [-3.75~+3.75]
Stop position adjustment
value
±3.75(mm)
Darkness [00~99]
Darkness adjustment value
xx
Factory Pitch
Print position adjustment
value for factory setting
±xx(dot)
Factory Cutter
Cut position adjustment value
for factory setting
±xx(dot)
Factory Disp
Dispense position adjustment
value for factory setting
±xx(dot)
Preliminary