Section 2: Installation
Page 2-4
CW408 Operator Manual
2.2 CONNECTIONS (cont’d)
2.2.3 To Connect the Power Cord
1.
Connect the AC power cord to the AC input terminal on
the back of the printer.
Make sure that the connector is correctly oriented.
Secure the printer with one hand, and insert the cable
firmly.
2.
Insert the AC power plug into a AC power outlet.
Make sure that the AC voltage of your region is within
the range of AC 100 to 240 V, 50/60 Hz.
* The shape of the power plug varies depending on the
region in which it was purchased.
Warning
Do not press the power button or insert/ remove the power cord while your hands are wet. Doing
so may cause an electric shock.
Caution
The supplied power cord is for use with this printer only.
Do not use this power cord with other electrical devices.
*
Preliminary