SATO CW408, Operator'S Manual, Page: 54 / 120

Section 3: Operation and Configuration
Page 3-28 CW408 Operator Manual
3.13 DEFAULT SETTING MODE (Cont’d)
3.13.1 Table of Default Settings (Cont’d)
Items
Default Mode Default Value
Factory
Setting
Printer
Setting
I/F
Settings
Control
Code
CW408
ADVANCE SETTINGS
DARKNESS RANGE O — — — A
BEEP ON ERROR O — — — ENABLE
DISPLAY ERROR O — — — DISABLE
HEAD CHECK O — — — DISABLE
HEAD CHECK O — — — STANDARD
HEAD CHECK MODE O — — — ALL
CHECK LABELS O — — — 000001
AUTO ONLINE O — — — ENABLE
CONTROL CODE O — — — STANDARD
PRIORITY SETTING — — — — COMMAND
LANGUAGE O — — — ENGLISH
DEFAULT MODE
DEFAULT MODE — — — — FACTORY SETTING
DEFAULT SETTING? — — — — NO
TEST PRINT
MODE SELECT — — — — USER TEST
SIZE SELECT — — — — LARGE
MAINTENANCE MODE
MODE SELECT — — — — SERVICE MODE
SERVICE MODE
SENSOR ADJUST
MODE SELECT — — — — AUTOMATIC
SENSOR SELECT — — — — ALL
I-MARK ADJUST LEVEL (E) — — — — 02
I-MARK ADJUST LEVEL (R) — — — — 07
I-MARK SLICE LEVEL — — — — 1.4 V
GAP ADJSUT LEVEL (E) — — — — 02
GAP ADJSUT LEVEL (R) — — — — 07
GAP SLICE LEVEL — — — — 1.4 V
PAPER ADJUST LEVEL (R) — — — — 07
PAPER SLICE LEVEL — — — — 1.4 V
MACHINE SETTING
USB SERIAL NO. — — — — ENABLE
POWER ON SETTING — — — — STANDBY
AUTO LABEL FEED — — — — ENABLE
AUTO FEED POS — — — — +00 dot
FACTORY MODE
FACTORY CLEAR
COUNTER CLEAR — — — — NONE
COUNTER INDICATION — — — — NONE
LIFE COUNTER — — — — 0.0M
HEAD COUNTER — — — — 0.0M
CUT COUNTER — — — — 0
TEST PRINT — — — — YES
SIZE SELECT — — — — LARGE
Preliminary