Section 3: Operation and Configuration
CW408 Operator Manual
Page 3-19
3.10 INTERFACE SETTING MODE (Cont’d)
I/F SETTINGS MODE
Menu
Description
Select the connected interface.
AUTO SELECT, USB or LAN can be selected.
AUTO SELECT
: The interface connected to the host becomes effective at
power on. When both LAN and USB are connected, USB becomes effective.
USB
: Connects to only USB.
LAN
: Connects to only LAN.
The initial setting is AUTO SELECT.
Select the communication protocol.
These screens are displayed only when using LAN.
STATUS3 and STATUS4 are available for selection.
The initial setting is STATUS4.
Set the timing for the host status reply.
These screens are displayed only when PROTOCOL is set to STATUS4.
ENQ
: Returns status after receiving Status Request (ENQ), which is sent from
the host.
CYCLE
: Returns status from the printer to the host at 900 ms intervals.
The initial setting is ENQ.
I/F SETTINGS
INTERFACE SELECT
LAN
I/F SETTINGS
INTERFACE SELECT
USB
I/F SETTINGS
INTERFACE SELECT
AUTO SELECT
I/F SETTINGS
PROTOCOL
STATUS3
I/F SETTINGS
PROTOCOL
STATUS4
I/F SETTINGS
REPLY TIMING
CYCLE
I/F SETTINGS
REPLY TIMING
ENQ
Preliminary