SATO KEIRYOKI WVAT6D0-3-10 Instruction Manual Download Page 10

Page: 10 / 18

III-6-2 Check mode

The current operation settings can be viewed in the check mode.

Check mode display

(1) Button operation

①

To enter check mode, press and hold the [MODE] button for at least 0.5 seconds.

②

The first two digits in the upper LED indicate the mode code, while the setting value is displayed in the

lower LED. (See "Mode code list" in the check mode.)

③

Every time the UP [

] button is pressed, the number included in the mode code increases

(a1 (A1), a2 (A2), a3 (

A3), …).

Every time the DOWN [

] button is pressed, the number included in the mode code decreases (b6, b5,

b4, b3, …).

The lower LED shows the value currently used to set the alarm, corresponding to the mode code.

④

Press the [MODE] button to return to the monitor mode.

If the unit is left idle for 60 seconds or so (no button is pressed), it returns to the monitor mode.

(2) Mode code list in the check mode

Mode code

Description

Setting value

a1 (A1)

Wind speed alarm criteria

Measurement item to determine the wind speed alarm
conditions
The criteria set here apply to alarms 1, 2 and 3.

0: No alarm output
1: Determined by the instantaneous

wind speed

2: Determined by the mean wind

speed

a2 (A2)

Wind speed alarm 1 setting value

Wind speed threshold value to determine the alarm
conditions

Setting range: 5 to 90 (m/s)
0: No alarm output

a3 (A3)

Wind speed alarm 2 setting value

Wind speed threshold value to determine the alarm
conditions

Setting range: 5 to 90 (m/s)
0: No alarm output

a4 (A4)

Wind speed alarm 3 setting value

Wind speed threshold value to determine the alarm
conditions

Setting range: 5 to 90 (m/s)
0: No alarm output
1: Wind direction alarm output

a5 (A5)

Setting value for the wind speed alarm confirmation
time

The alarm is activated if the wind speed readings remain
above the threshold value for this time period.
The time set here applies to alarms 1, 2 and 3.

Setting range: 0 to 60 (sec)

a6 (A6)

Setting value for the wind speed alarm cancellation
time

After activation, the alarm is cancelled if the wind speed
readings remain below the threshold value for this time
period.

Setting range: 3 to 60 (sec)

Wind Speed & Direction Indicator with Alarm

Mean

Instant

Wind Direction

Instant

Alarm

Mode code is changed with [

buttons

Summary of Contents for WVAT6D0-3-10



















Search results

Summary of Contents for WVAT6D0-3-10

Reviews:

Related manuals for WVAT6D0-3-10

Brands by name

Popular brands

SATO KEIRYOKI WVAT6D0-3-10, Instruction Manual

Search results

Summary of Contents for WVAT6D0-3-10

Reviews:

Related manuals for WVAT6D0-3-10

Brands by name

Popular brands