User Manual
London – United Kingdom
www.saten.co.uk
UAE – Dubai
Fourth Floor, 30-31 Furnival Street
JAFZA - Al Aweer
Post code: EC4A 1JQ
TEL: +97143205447
TEL: +448456769185
FAX: +97143205448
Customize Patterns
Patterns can be setup by recording the movement of the PTZ.
To set up and call PTZ patterns:
1.
Enter the PTZ Control interface, shown in Figure 3, by selecting PTZ from the mouse
menu or clicking the
PTZ
button on the front panel.
2.
Select the
Pattern
button to enter the
Pattern Management
menu, shown in Figure 8.
Figure 8. Pattern Management Menu
3.
Select a
Pattern Number
.
4.
To record a new pattern, select the Run Record button to start recording of the
movements of the PTZ. Use the PTZ control panel to move the PTZ. The PTZ
movements will be recorded until the Stop Record button is clicked.
5.
To run a pattern, click the
Run Pattern
button on a valid pattern. The PTZ will move
according to the path that was defined until Stop Pattern is clicked.
6.
Click
OK
to exit the current menu.
