User Manual
London – United Kingdom
www.saten.co.uk
UAE – Dubai
Fourth Floor, 30-31 Furnival Street
JAFZA - Al Aweer
Post code: EC4A 1JQ
TEL: +97143205447
TEL: +448456769185
FAX: +97143205448
Figure 9. Alarm Management Settings
3.
Set the alarm input type to be Normally Opened (N.O) or Normally Closed (N.C).
4.
Check the checkbox next to
Setting
and click the
Handle
button to enter the Alarm Input
Handle menu.
5.
Select the
Triggered Camera
tab.
6.
Select cameras to trigger for recording when alarm occurs by checking the checkboxes
under the desired cameras, as shown in Figure 10.
Figure 10. Triggered Cameras Menu
7.
User may select the PTZ camera to link with the alarm input and then set the callup of
preset, patrol and pattern for alarm linked actions.
8.
Click the
OK
button to complete setup.
You may now add a schedule to start recording when an alarm is triggered (See
Scheduling a
Recording
).
Alarm outputs may also be configured in the
Alarm Management
menu. To set up Alarm Output:
1.
Select the
Alarm Output
tab. This will bring up the Alarm Output interface, shown in
Figure 11.
